Skip to content

Home Cinema Installations and Noise Transmission Through Doors

The reference level of ones soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not hard to listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping instantly inside the cinema room. In home installation, quite often we find bedrooms and other living areas to be right next to the home cinema residence. Special room construction techniques allow us develop a sufficient noise barrier, in order to reduce any sound transmission to the adjacent rooms.

However, doors continually been the weakest point, in this attempt. The mass, damping and stiffness of the home cinema door determines its resistance for the passage of any sound waves. A door's ability to cut back noise is given by its Sound transmission Class. This means, the higher within the Class the better the efficiency.

One more problem arises though; Sound waves can travel through any opening with very little loss. And to top it off, a tiny hole in a barrier would transmit almost as much sound as being a much larger golf hole. This acoustic property of sound could be a big problem in a home cinema installation, where high quality construction is required. Which is where acoustical gaskets come into play. A home cinema door, in order to be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the standard of of the acoustical gasket in an at home cinema installation, would see how close specific sound performance of the door, stomach to the published order. A hi-end Home Theater Installation St Albans cinema design should take all the info into consideration, to ensure a hi-end acoustical stem.